中文版 English
  • Products

    3 Phase Hybrid Solar Inverter Jingle Star Series 10K-200KVA

    Power Range: 10K-200KVA

    ● Adopt 4 layer PCB, and SMD technology.
    ● Perfect protection function.
    ● Intelligent communicate.
    ● High dynamic adjustment.

    Where to buy »
    3 Phase Hybrid Solar Inverter Jingle Star Series JS33 10K-200KVA (3ph in / 3ph out)

    Features:

    1. Pure sine wave output.

    2. Can add internal Mppt Controller .

    3. Adopt 4 layer PCB, and SMD technology.

    4. Can choose the AC charger by button: On-off.

    5. With two charging mode: AC charging mode and solar charging mode, solar charging priority.

    6. Can choose two work mode: Solar-Grid-Battery, Solar –battery-Grid, Can choose it by LCD screen.

    7. High efficiency IGBT (Insulated Gate Bipolar Transistor) inverter technology: The sixth generation low-exhaust and big-  power IGBT with excellent high speed switch feature, high voltage feature and large current feature. Drives by electric voltage, only need small control power. The sixth generation with lower saturation voltage, the inverter has high efficiency, low temperature, high reliability.

    8. Intelligent detecting function : This system microprocessor can continually online detect power status, the breaker status and all the working status of the circuit.

    9. Excellent load feature : It is completely capable to load from 0-100% while no need to change to bypass, which make sure the output reliable.

    10.  Intelligent communication-URL Based Remote Monitoring and Operation :With RS232 and RS485 standard collocation, optional SNMP and dry contact.

    11. Perfect protection :Input/output over/low voltage protection, input surge protection, phase sequence protection, battery over charge/discharge protection, short circuit protection, over-temperature protection and so on, as well as alarm function.

    12. Selectable battery inspection module :Can test the single parameter and display on the LCD, battery failure will immediately alarm and inform the administrator.

    13. High-powered dynamic feature :Adopt kinds of feedback control such as instantaneous control mode and virtual value, not only reach the high dynamic adjustment, but also reduce the output voltage distortion.

    User Guides

    User's Manual

    No upload!

    Brochure

    Brochure

    No upload!

    Technical Specification:

    Model

    JS33 Series

    10K

    20K

    30K

    40K

    50K

    60K

    80K

    100K

    120K

    160K

    200K

    Capacity (KVA)

    10KVA

    20KVA

    30KVA

    40KVA

    50KVA

    60KVA

    80KVA

    100KVA

    120KVA

    160KVA

    200KVA

    Power ( Watts )

    8KW

    16KW

    24KW

    32KW

    40KW

    48KW

    64KW

    80KW

    96KW

    128KW

    160KW

    Grid (AC Input)

    Max input current

    31A

    41A

    61A

    81A

    101A

    121A

    161A

    201A

    241A

    321A

    401A

    Type

    Three phase, 3L+N+G

    Line-Neutral Voltage

    220/230/240VAC±25% (100/110/120VAC is optional)

    Line-Line Voltag

    380/400/415VAC±25% (200/208/220VAC is optional)

    Input frequency

    50/60Hz±5%

    Charge voltage

    432V±1%

    Charge current power

    capacity *20%

    PV

    PV input range

    560VDC~800VDC

    Charge current

    depends on  inverter capacity

    Battery

    Type

    Maintenance free lead-acid battery (other type battery need customize )

    Battery voltage

    384Vdc

    Battery capacity

    According to backup time

    Battery low voltage protection

    >336V

    Inverter (Output)

    Inverter output waveform

    Pure sine wave, THD<3% (linear load)

    Line-Neutral Voltage

    220/230/240VAC±2% (100/110/120VAC is optional)

    Line-line Voltage

    380/400/415VAC±2% (200/208/220VAC is optional)

    Frequency

    50/60Hz±0.5%

    Dynamic feature

    Inverter output transient dynamic range less than±5%recovery time <20mS

    Crest factor

    3:1

    Overload protection

    (Inverter output)125% overload, delay 1mins protect, 150% overload,  immediate protect

    Inverter efficiency

    >90% ( 100% load )

    System Parameters

    Transfer time

    <0.5ms ( inverter--bypass )

    Protection

    Output short circuit, overload, over voltage, under voltage, over temperature etc protection, have audible and visual alarm

    Display

    LCD display input and output voltage, output current, the inverter voltage, frequency, output current, battery voltage, PV voltage, PV charging current, temperature mode, flowcharts, current work status, event record and system information

    Operating environment

    Temperature 0-40

    Relative humidity

    30%-95%

    Work sequence

    Solar-Grid-Battery or Solar –battery-Grid, Can choose one of the mode via  LCD panel

    Operation altitude (max)

    <1000 meters ( per increase 100 meters power decrease 1%, at most 4000 meters )

    Computer communicate interface

    RS232/RS485

    Cooling method

    force-air cooling

    Size W*D*H (mm)

    600*620*1250

    700*620*1530

    980*800*1800

    1380*950*1800

    Weight (kg)

    236

    265

    342

    407

    485

    506

    770

    913

    937

    1440

    1760

    product specification are subject to change without further notice.



    Product Category Contact Us UPSEN
    • UPS Power
    • Inverter Power
    • Battery Power
    • Solar Power
    • Electric Vehicle Charging
    1005, Xingji Tower Shangde Rd., Xinqiao St., Bao'an Dist. Shenzhen China
    sales@upsen.net
    +86 - (0)755 - 29610051
    +86 - (0)755 - 27807701
    Connect with us through the following social media platforms!
    Copyright © 2016 Shenzhen UPSEN Electric CO., Ltd. All rights reserved.        
    Power by: srl_design